nexus
Showing all 16 resultsSorted by price: low to high
-
LSU4.9 Wideband Adaptor Harness LSU4.9 to DTM6
$31.00-
Add to cart
LSU4.9 Wideband Adaptor Harness LSU4.9 to DTM6
Suits: NEXUS Series devices
Includes: 1 x HT-010726 LSU4.9 to DTM-6 Harness
Notes: Plug’n’Play with NEXUS series harnesses
$31.00 -
NTK Wideband Adaptor Harness For NEXUS Series Devices Length: 1.2M (4ft)
$31.00-
Add to cart
NTK Wideband Adaptor Harness For NEXUS Series Devices Length: 1.2M (4ft)
Suits: NEXUS Series Devices
Includes: 1 x HT-010727 NTK to DTM-6 Harness
$31.00 -
Wideband Adaptor Harness – 400mm Length: 400mm
$31.00-
Add to cart
Wideband Adaptor Harness – 400mm Length: 400mm
Suits: NEXUS Series devices
Includes: 1 x DTM-6 to Superseal Pins Harness
Notes: Pre terminated with AMP superseal pins for easy installation into your ECU
$31.00 -
Plug and Pins Only – AMP 34 Pin 4 Row 3 Keyway Superseal Connector
$60.00-
Add to cart
Plug and Pins Only – AMP 34 Pin 4 Row 3 Keyway Superseal Connector
Suits: Nexus: PD16, Elite 550/750/950 ECUs, Haltech IQ3 Street Dashes and the large connector on Nexus: R5, Elite 1000-2500, PS1000/2000 and E8/11 ECUs.
$60.00 -
Wideband Sensor – Bosch LSU 4.9
$130.00-
Add to cart
Wideband Sensor – Bosch LSU 4.9
Suits: Nexus ECU, Elite Pro Plugin ECU and WB1/WB2
Includes: Bosch LSU 4.9 sensor with Factory calibration resistor connector (not a Deutsch DT-6 connector)
$130.00 -
DC Motor Driver – DCMD Size: 86mm x 55.5mm
$165.00-
Add to cart
DC Motor Driver – DCMD Size: 86mm x 55.5mm
Outputs: 2
Suits: Turbosmart Electronic Wastegates Varex Motors DC Motors
Includes: 1 x DC Motor Driver – DCMD 1 x DT02-2S with Pins and Wedge 1 x DT06-4S with Pins and Wedge 1 x DTM06-4S – with Pins and Wedge 1 x DTM04-4P- with Pins and Wedge 1 x Quick Start Guide
Notes: Works with Nexus Series, Elite Series and Platinum Series ECU’s Requires 2 x DPO outputs from ECU to control ( Active State = Low)
$165.00 -
LSU4.9 Wideband Hardware Pack
$180.00-
Add to cart
LSU4.9 Wideband Hardware Pack
Suits: NEXUS Series
Includes: 1 x Bosch LSU 4.9 Sensor, 1 x HT-010726 – Adaptor Harness, 1 x Weldable Bung
Notes: Plug and Play with NEXUS Series Harnesses
$180.00 -
Wideband O2 Sensor NTK LZA08-H5
$180.00-
Add to cart
Wideband O2 Sensor NTK LZA08-H5
Suits: NEXUS Series devices and NTK WB1+WB2 CAN Wideband units.
Includes: 1 x NTK LZA08-H5 Wideband Sensor – modified
Notes: Genuine NTK sensor modified by Haltech to improve sensor longevity and accuracy at extremely rich air to fuel ratios by the addition of a thin walled spring steel radial shroud at the sensor tip.
$180.00 -
TMS-4 Tyre Monitoring System External Sensors
$205.00-
Add to cart
TMS-4 Tyre Monitoring System External Sensors
Suits: Haltech Nexus and Elite ECU’s using NSP and ESP Software
Includes: 1 x Haltech TMS-4 Reciever 1 x TE Mcon to DTM-4 CAN Cable 4 x External Sensors 4 x anti-theft lock nuts Lock Nut spanner Mounting Hardware Quick Start Guide
Notes: Batteries for external sensors are included and are replaceable (Use- CR1632) Typical lifespan of battery is 1 to 2 years
$205.00 -
TMS-4 Tyre Monitoring System Internal Sensors
$205.00-
Add to cart
TMS-4 Tyre Monitoring System Internal Sensors
Suits: Haltech Nexus and Elite ECU’s using NSP and ESP Software
Includes: 1 x Haltech TMS-4 Reciever 1 x TE Mcon to DTM-4 CAN Cable 4 x Internal Sensors Warning Sticker Set Mounting Hardware Quick Start Guide
Notes: Batteries for internal sensors are included and are NOT replaceable Typical lifespan of battery is 3years
$205.00 -
NTK Wideband Hardware Pack
$215.00-
Add to cart
NTK Wideband Hardware Pack
Suits: NEXUS Series devices
Includes: 1 x NTK LZA08-H5 Sensor, 1 x HT-010727 – NTK to DTM-6 Harness, 1 x Weldable Bung
Notes: Plug’n’Play with NEXUS Series Harnesses
$215.00 -
PD16 Flying Lead Harness – 5M Length: 5M / 16FT
$290.00-
Add to cart
PD16 Flying Lead Harness – 5M Length: 5M / 16FT
Suits: Nexus PD16
Includes: Wire in Harness, 5 meters (16ft) in Length – Suits Nexus PD16
$290.00 -
Haltech CAN Keypad 8 button (2×4)
$360.00-
Add to cart
Haltech CAN Keypad 8 button (2×4)
Suits: NEXUS and Elite devices only
Includes: 1 x 8 button keypad (2×4), 1 x Adaptor Harness DT-4 to DTM-4, 1 x DTM to DTM Cable -1200mm, 1 x Label Set, 1 x Mounting Nut and Washer Kit
Notes: Not compatible with Platinum or earlier ECUs
$360.00 -
Haltech CAN Keypad 15 button (3×5) Thread: M6
$435.00-
Add to cart
Haltech CAN Keypad 15 button (3×5) Thread: M6
Suits: NEXUS and Elite devices only
Includes: 1 x 15 Button Keypad (3×5), 1 x Adaptor Harness DT-4 to DTM-4, 1 x DTM to DTM Cable -1200mm, 1 x Label Set, 1 x Mounting Nut and Washer Kit
Notes: Not compatible with Platinum or earlier ECUs
$435.00 -
TCA-8 Eight Channel Thermocouple Amplifier
$549.00-
Add to cart
TCA-8 Eight Channel Thermocouple Amplifier
Suits: Elite and NEXUS Series ECUs only
Includes: Eight Channel Thermocouple Amplifier, CAN cable, DTM-4 to Circular Connector Cable 1200mm / 4ft, Quick Start Guide
Notes: Thermocouple Probes Sold Separately
$549.00 -
PD16 PDM + Plug and pin Set
$1,175.00-
Add to cart
PD16 PDM + Plug and pin Set
Suits: Nexus or Elite Series ECU’s
Includes: Haltech PD16 and Plug and Pin Set to suit
Notes: The NEXUS PD16 is Haltech’s new power distribution product. Boasting new, innovative yet user-friendly technology, it sets a new market standard for power distribution systems. Designed to integrate seemlessly into your existing Haltech Elite or Nexus engine management system, the PD16 delivers safe, dependable power delivery to your vehicle.
$1,175.00
